Sihai refining and environmental protection refinery equipment

Refinery equipment is divided into the following operation methods: 1, water treatment: two parts of water. Part of the condenser is water without any pollution. The other part is the water for dust removal, which is recycled water, only evaporation, no emissions.

2, waste disposal: there are two parts of waste residue in the production process. One is that the waste residue discharged from the reactor is nontoxic and tasteless at high temperatures, and can be used in the chemical work of carbon black as well as building materials. The two is that the residue of coal burning can be used for building materials. The two have no emissions.

3. Waste gas treatment: It is divided into three parts: first, a small amount of water vapor and a small amount of oil and gas leaked out of the inlet when feeding, recovered by the suction hood and sent to the dust collector for treatment by secondary combustion; second, when burning coal, smoke and dust are pumped from the induced draft fan to the dust collector for treatment and discharged by the chimney to ensure that the smoke and dust emissions meet the relevant standards of GB13271. -2001. Third, the natural gas (methane, ethane, butane, hydrogen, etc.) which can not be recovered under normal temperature and atmospheric pressure from the reaction kettle is sent into the furnace through closed firearms through pipelines and burned by gas spray guns, which is energy-saving and environmental friendly. During the production process, the equipment operates in a totally sealed state without any smell.

4. Noise treatment: Low noise fan is selected, the noise is less than 60 dB, part of the power noise and feeder noise is not more than 50 dB. If the workshop is surrounded by materials and trees, to ensure that the ambient noise around the factory area is less than 50 decibels (daytime), 45 decibels (night). www.viaggidellepleiadi.com